CONTINUING EDUCATION
Spring 2025
Courses
Motor Controls Course #SP 118
Days: Mondays & Wednesdays Nights: Eight (8) Nights 32 Hour course
Instructor: Bart Murray Course Fee………$40.00* Class Size: 8 Min. – 12 Max.
Time: 3:30 pm to 7:30 pm
Dates: April 7th, 9th, 14th, 16th, 21st, 23rd, 28th, and 30th
Description: This class will review basic motor control theory, including safety, code, and meter use, before delving deeper into motor control scenarios, building ladder diagrams, and troubleshooting circuits.
*(will be refunded-in-full if all classes are attended)
Estimating/Take-Off Class Course #SP 121
Days: Tuesdays & Thursdays Nights: Six (6) Nights 18 Hour course
Instructor: Dan Twomey Course Fee………$40.00* Class Size: 8 Min. – 16 Max.
Time: 4:30 pm to 7:30 pm
Dates: April 8th, 10th, 15th, 17th, 22nd, and 24th
Description: This class will cover basic estimating, material take off, labor unit review and specification review. It will teach you how to use the estimate for job management and will cover both new spaces and tenant improvement projects.
*(will be refunded-in-full if all classes are attended)
Foreman Development Training – Series I Course #SP 122
Days: Tuesdays & Thursdays Nights: Eleven (11) Nights 33 Hour course
Instructor: James Owens Course Fee………$40.00* Class Size: 12 Min. – 24 Max.
Time: 4:30 pm to 7:30 pm
Dates: April 15th, 17th, 22nd, 24th, 29th, May 1st, 6th, 8th, 13th, 15th, and 20th
Description: This class is the first of two Foreman Development classes we currently offer. This class covers aspects of being a Foreman in the Electrical Industry including The Role of the Foreman, Project Start-Up, Material Management, Labor Relations, Understanding the Estimate, and Manloading and Scheduling.
*(will be refunded-in-full if all classes are attended)
OSHA 30 Training Course #SP 123
Days: Tuesdays & Thursdays Nights: Eleven (11) Nights 33 Hour course
Instructor: Jon Schlaman Course Fee………$40.00* Class Size: 12 Min. – 24 Max.
Time: 4:30 pm to 7:30 pm
Dates: April 15th, 17th, 22nd, 24th, 29th, May 1st, 6th, 8th, 13th, 15th, and 20th
Description: This class will cover 0SHA-30 training for the construction industry. Thirty hours are required by the Occupational Health and Safety Act (OSHA), which will apply to the 30-hour Construction Industry course completion card. The course is comprised of 25 Sections that will cover hazards and safety requirements in the construction trades.
*(will be refunded-in-full if all classes are attended)
Safe Work Practices – NFPA 70E Course #SP 124
Days: Mondays & Wednesdays Nights: Eleven (11) Nights 33 Hour course
Instructor: Paul Ortiz Course Fee………$40.00* Class Size: 8 Min. – 24 Max.
Time: 4:30 pm to 7:30 pm
Dates: April 16th, 21st, 23rd, 28th, 30th, May 5th, 7th, 12th, 14th, 19th, and 21st
Description: Gain better awareness of hazards facing the Electrical Worker working on, or near, energized Electrical Equipment. Learn why Lockout/Tagout, P.P.E., and other electrical safety measures matter to everyone and what potential electrical hazards exist in the workplace. This course intends to improve your understanding of essential safety-related work practices and responsibilities. Review the scope of NFPA 70E standard, identify potential electrical hazards in the workplace, describe safety-related training requirements, and learn the essential requirements for development of an electrical safety program. Who Will Benefit? Anyone concerned with electrical safety, including superintendents, project managers, general foreman, foreman, journeyman inside wireman, safety managers, and electrical inspectors.
*(will be refunded-in-full if all classes are attended)
Programmable Logic Controller Training Course #SP 125
Days: Tuesdays & Thursdays Nights: Eleven (11) Nights 33 Hour course
Instructor: Rudy Furlan Course Fee………$40.00* Class Size: 8 Min. – 12 Max.
Time: 4:30 pm to 7:30 pm
Dates: May 1st, 6th, 8th, 13th, 15th, 20th, 22nd, 27th, 29th, June 3rd, and 5th
Description: This class begins with a review of basic motor controls and troubleshooting before getting into Programmable Logic Controller (PLC) training for the construction industry. Students will wire control circuits on our motor control boards using limit switches, relays, and time-delay relays to control functions. Then students will learn the advantages of PLCs and will be introduced to programming, wiring, and troubleshooting using the PLC trainers in our lab. Students will learn the basics of PLC operation which leads to a better understanding of modern control systems being integrated into the Building Management Systems today. In this class, students will write simple programs, upload them onto the PLC and see how they operate. Students are required to bring a Windows-based laptop to program with.
*(will be refunded-in-full if all classes are attended)
CPR & First Aid Training Course #SP 126
Days: Monday & Wednesday Nights: Two (2) Nights 6 Hour course
Instructor: Daniel Hurtado Course Fee………$30.00* Class Size: 8 Min. – 12 Max.
Time: 4:30 pm to 7:30 pm
Dates: May 5th and 7th
Description: CPR and Basic First Aid Training and certification. It can save a life on the jobsite or at home.
*(will be refunded-in-full if all classes are attended)
Code Calculations Course #SP 127
Days: Mondays & Wednesdays Nights: Eight (8) Nights 24 Hour course
Instructor: Paul Zarich Course Fee………$40.00* Class Size: 8 Min. – 24 Max.
Time: 4:30 pm to 7:30 pm
Dates: May 5th, 7th, 12th, 14th, 19th, 21st, 26th, and 28th
Description: This class will review, and practice common code calculations used for Box Fill, Raceway Fill, Conductor ampacity, Correction factor, Voltage Drop, motors, and transformers.
*(will be refunded-in-full if all classes are attended)
Fiber Optic Training Course #SP 128
Days: Mondays & Wednesdays Nights: Six (6) Nights 32 Hour course
Instructor: Joe Hagen Course Fee………$40.00* Class Size: 8 Min. – 12 Max.
Time: 3:30 pm to 7:30 pm
Dates: May 5th, 7th, 12th, 14th, 19th, and 21st
Description: This class will cover Fiber Optic training for the construction industry, including safety and code. There is a prerequisite for this class that students must complete prior to the in-person dates indicated above for this course. Students must complete approximately 16 hours of online training prior to the In-Person portion of the class. Once payment is received, the instructor’s email will be provided, and the instructor will be available for guidance with the online coursework. For the In-Person portion, students will have 16 hours of hands-on training including the history, current use, and future of Fiber Optics in construction. Learn how to install, terminate, inspect, and test Fiber Optic cable using Corning termination kits and Fluke meter testing equipment. There will be a certification test at the conclusion of the course. With successful completion of the written certification test and demonstration of the necessary knowledge, skills, and abilities to perform the hands-on work, students will be awarded the Fiber Optic Associations "Certified Fiber Optic Technician" certificate. Be advised! There is a non-refundable $100 certification fee. The certification is good for 3 years.
*(will be refunded-in-full if all classes are attended)
Large Conduit Bending Course #SP 129
Days: Tuesdays & Thursdays Nights: Six (6) Nights 18 Hour course
Instructor: Scott Kingshill/Dan Keeney Course Fee………$40.00* Class Size: 12 Min. – 16 Max.
Time: 4:30 pm to 7:30 pm
Dates: May 6th, 8th, 13th, 15th, 20th, and 22nd
Description: In this class students will review the basics of large conduit bending, including safety and code, and will practice bending 1 ½” through 4” conduit using a variety of sidewinder and hydraulic benders available in the lab. Students will complete a series of challenging bends to gain proficiency.
*(will be refunded-in-full if all classes are attended)
CPR & First Aid Training Course #SP 130
Days: Tuesday & Thursday Nights: Two (2) Nights 6 Hour course
Instructor: Daniel Hurtado Course Fee………$30.00* Class Size: 8 Min. – 12 Max.
Time: 4:30 pm to 7:30 pm
Dates: May 13th and 15th
Description: CPR and Basic First Aid Training and certification. It can save a life on the jobsite or at home.
*(will be refunded-in-full if all classes are attended)
Electrical Vehicle Charging Systems (EVCS) Course #SP 131
Days: Self-Directed Online Timeline: Four (4) weeks 32 Hour course
Instructor: Pete El Qare Course Fee………$85.00 Class Size: 8 Min – 24 Max
Dates: May 14th 28th June 11th (Zoom) and June 12th in-person (Certification test)
Time: 4:30 pm to 7:30 pm
Description: This class meets online briefly on the first and last night, via Zoom Video Conference, for details about beginning and completing the coursework. The class also meets for a three-hour class session two weeks into the class to review the Code Calculations in Lesson 4 of the coursework. The course follows a self-guided curriculum on a Learning Management System which cover all aspects of electric vehicle equipment including the vehicles, charging stations, electrical vehicle supplies, NEC requirements, advanced load calculations, site assessment, troubleshooting and commissioning of electric vehicle charging stations. Following the completion of the coursework, the certification test will be offered in-person at the school following the last day of class.
*(will be refunded-in-full if all classes are attended)
Intro to Computers for Electrical Construction I Course #SP 132
Days: Saturday One 8-hour day 8 Hour course
Instructor: Jon Schlaman Course Fee………$40.00* Class Size: 8 Min. – 12 Max.
Time: 8:00am – 12:00pm and 12:30pm – 4:30pm
Dates: May 31st
Description: This class will show how computers play an important role in the design, installation, and successful completion of electrical construction projects using current safety and code standards.
*(will be refunded-in-full if all classes are attended)
Foreman Development Training- Series II Course #SP 133
Days: Tuesdays & Thursdays Nights: Eleven (11) Nights 33 Hour course
Instructor: James Owens Course Fee………$40.00* Class Size: 12 Min. – 24 Max.
Time: 4:30 pm to 7:30 pm
Dates: June 3rd, 5th, 10th, 12th, 17th, 19th, 24th, 26th July 1st, 3rd, and 8th
Description: This course is the second part of the Foreman Development series, and a continuation of the Foremen Development Training Series I class. This class is the. This program provides an overview of the duties and responsibilities of the foreman on a typical job and how the implementation of industry “best practices” can improve competitiveness in the construction marketplace. Modules covered include: The Role of the Foreman, Safety, Communication, documentation, change management, project closeout, understanding the estimate, and highly effective foreman.
*(will be refunded-in-full if all classes are attended)
CPR Refresher (Online) Course #SP 134
Days: Wednesday Nights: Two (2) Nights 6 Hour course
Instructor: Daniel Hurtado *Course Fee………$30.00 Class Size: 8 Min. – 12 Max.
Time: 4:30 pm to 7:30 pm
Dates: June 4th (to begin online portion) and 25th (in-person)
Description: This is an online refresher course for CPR. Once the online portion is completed, students must arrive in-person on the date indicated to demonstrate the lifesaving skills needed for CPR recertification.
*(will be refunded-in-full if all classes are attended)
Intro to Computers for Electrical Construction II Course #SP 135
Days: Saturday One 8-hour day 8 Hour course
Instructor: Jon Schlaman Course Fee………$40.00* Class Size: 8 Min. – 12 Max.
Time: 8:00am – 12:00pm and 12:30pm – 4:30pm
Dates: June 7th
Description: This class will show how computers play an important role in the design, installation, and successful completion of electrical construction projects using current safety and code standards.
*(will be refunded-in-full if all classes are attended)
Download:
|
